Saturday, April 28, 2012

velvet smoking jacket

 Well, actually it is velveteen or cotton velvet. Much easier than rayon or silk velvet to work with when making a jacket.

I posted earlier about the inspiration behind this jacket here, and this is the version we are making.

I had cut right into the fabric for this, fit the basic shell, taken it apart and marked the alterations. I then cut the linings and facing, then the pockets and cuffs were made up and basted on. The sleeves are basted in and then we are ready to fit.
The binding trim that we got to work with is a knit! It is much wider than the original vintage trim, but so far it has handled well. I don't know about how you feel about velvet fabrics but they can be very tricky to sew. Not necessarily sewing two pieces of velvet together, because the naps grip each other,but sewing other fabrics to velvet. The depth of the nap can cause no end of slippage or bending as you try to machine sew linings to facings or trim to an edge.

The flat trim that is on the pockets will also bind the edges of the jacket, finishing off the lapels and hem. The cording is separate and will be zigged onto the edge of the flat binding.
On the sleeve cuffs we will probably attach the cording by hand, as it needs to go along the edge of the cuff, then form a clover leaf (which is outlined in white) on the sleeve itself then come back onto the cuff to finish off.



So we have a few alterations to make, dealing with a severely dropped right shoulder and corresponding sleeve length issue, then on towards finishing this for Thursday.  (it is sitting crookedly on the wrong stand)
I was sidelined Friday by some virus that was going around and I know that when I am back to work on Monday, there will be a line up of sewers with questions to answer and details to be finalized so I am off to get more rest.

2 comments:

  1. has the cuff been put into the seams?

    ReplyDelete
    Replies
    1. no, I think we seamed them separately and they slip over the sleeve. In this way they could be moved up or down if the sleeve length needed to be adjusted, and maintain the proportion of the cuff.

      Delete